Auro Gold is an all-natural water purification solution that safely and effectively purifies water. Its unique, patented formulation of ionic sulfate minerals (electrolytes) neutralizes and assists in the reduction and removal of over 250 contaminants from water, providing you with cleaner, healthier, better-tasting drinking water.

Iron…………………………………..1,330.0 PPM

Magnesium………………………….451.0 PPM

Potassium……………………………271.0 PPM

Phosphorus…………………………..30.5 PPM

Calcium………………………………..26.3 PPM

Manganese…………………………..21.6 PPM

Zinc……………………………………….2.1 PPM

*UNITS USED TO MEASURE MINERAL CONCENTRATION: PPM = PARTS PER MILLION

Auro Gold also contains up to 80 trace minerals including alum, cerium, chromium, cobalt, copper, lanthanum, lithium, nickel, rubidium, scandium, selenium, silicon, strontium, sulfur, titanium, and vanadium. As a natural substance, the mineral composition can vary slightly.

Auro Gold purifies water in a 4-step process:

1. Coagulation: When added to water, Auro Gold causes invisible, suspended fine particles to destabilize, or neutralize, allowing the particles to come closer together, forming clumps, making it easier to separate solids from the water.

2. Flocculation: Flocculation is the process whereby the clumps of bacteria and particulate impurities formed during the coagulation process gather, or floc, and come together forming clusters. Once step one and two are complete, the contaminants are now neutralized and insoluble.

3. Precipitation: Once Coagulation and Flocculation occur, the insoluble, neutralized contaminants solidify as they precipitate out of solution.

4. Deposition or Sedimentation: The precipitates settle and are deposited as sediment at the bottom of your water container. This four-step process allows the precipitated contaminants to be easily filtered.

Auro Gold has been lab tested according to EPA and NSF/ANSI standards (when applicable) and proven to eliminate or reduce over 250 contaminants from water. 

Auro Gold does not have an expiration date. Stored properly, it will remain effective indefinitely.

You can use Auro Gold to purify any water except salt water; this includes, but is not limited to, distilled water, reverse osmosis water, alkaline ionized water, toilet water, rain water, river, lake, or pond water, or any other freshwater source.

Stir well to distribute the solution evenly throughout your water.

1. Keep your water container uncovered to allow chlorine and other gaseous contaminants like volatile organic compounds (VOC’s) to dissipate entirely.

2. Don’t refrigerate your water during the treatment process because cold temperatures slow down precipitation.

The wait time depends on the quality of the starting water. If the water you’re starting with is considered to be microbiologically safe (e.g. distilled or reverse osmosis water), wait 5-15 minutes before drinking. For polluted water, the suggested wait time is 24-48 hours to ensure the neutralization of toxic contaminants.

Time-Saving Tips:
• Treat two large batches of water with Auro Gold at the same time, that way, you’ll always have one to use for drinking while the other is being treated. (1 or 2.5 gallon HDPE plastic jugs work fine and can be found at any grocery store.)

• Add Auro Gold to warm or hot water to help speed up the treatment process.

Yes. Though it may be unpleasant to look at, it is completely harmless and if consumed, will just pass through your body. However, most people prefer to remove it from their water. To remove it, you can use a water filter, pour your water through a cheese cloth or coffee filter, or simply pour the top portion into a separate container leaving the residue in the bottom to discard. You can pour this on your plants instead of down the drain!

You can store your purified water in either a glass, stainless steel, ceramic, or HDPE #2 BPA-free plastic container.

Our 32-ounce bottles are made of food-grade, high-density polyethylene (HDPE) #2 plastic. We chose this material for our larger bottles because it’s one of the safest plastics with no known health concerns, is BPA-free, and easy to ship and recycle. Our small 2 and 4-ounce bottle is glass. All of our bottles are made in the USA.

• If you are confident that the starting water is clean (e.g. distilled, filtered and spring water), you can wait 5-15 minutes before drinking. 


• When treating water in a restaurant, the suggested wait time is 5-15 minutes. 


• It is ideal to let it dwell overnight to ensure all contaminants are neutralized. 


• For polluted water, the suggested wait time is 24 hours. It can take up to 72 hours to neutralize all impurities and complex contaminants, such as micro-organisms.